Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Tanaka M700 Co2 Mag

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Tanaka M700 Co2 Mag

    So I've got me a Co2 mag. But when I put the Co2 bulb in the regulator and then open the valve on the regulator to let the Co2 through the tubing that connects it to the mag, the Co2 just vents out the top of the mag (the little brass coloured circle at the top of the mag)

    If I close the bolt I feel the gas coming through the barrel.

    I get the feeling I might have blown the seal at the top of the mag, but not sure how I would know for sure or what replacement parts I would need.

    Any help is much appreciated.
    It will take less bullets to kill him now than if we wait for him to turn into a zombie.

    The elderly. They seem nice enough, but can they really be trusted ?
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Tanaka M700 Co2 Mag

    take your mag apart, they are quite simple internally

    The strike plate moves a sprung rod which moves a cam which then opens the release valve

    lube what moves, check your springs and re assemble.
    Originally posted by palmer234
    Swerve talks sense. I like him.
    Originally posted by Robin-Hood
    Swerve does in fact talk sense, I also like him.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Got this sorted thanks turns out it was just the valve that was sticking
      It will take less bullets to kill him now than if we wait for him to turn into a zombie.

      The elderly. They seem nice enough, but can they really be trusted ?
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      Four Leaf Find out more about Four Leaf
      Working...
      X