WE (RaTech) npas

[James_Bond]

Hi guys, about to order my npas kit for my new HK416. I cant find one for the HK416 so will the M4 one work in the HK?


Any ideas?


All the best

Andrew

[Caveira]

Re: WE (RaTech) npas

Moved to tech

[guard-sniper87]

Re: WE (RaTech) npas

what version mate,

the v1 was the M4 bolt and carrier,

but now the bolt in the v2's have nearly the same specs as the real steel,
lighter, more robust and a smaller hole in the outlet gas nozzle

the v1 will have the M4 npas kit, as they were just 416 recievers and RAS unit,

but not too sure about the newer models

pm 1st commando as he is intouch with guys at WE alot so ask him

[1st commando]

Re: WE (RaTech) npas

If your HK416 has the brass tube (closed bolt) it will need the M4 npas.

If it has no brass tube(open bolt) then I would go for the G36/M14/PDW open bolt npas valve as it should be the same

[James_Bond]

Re: WE (RaTech) npas

thanks mate, much appreciated.
One more question, does the HK416 have a tightbore installed or shal i buy one. Only reason i ask is because the gun is quite good as it is. (but if it can be better i would like it to be

[1st commando]

Re: WE (RaTech) npas

they are tighter than most aegs, personally i wouldn't bother mate. Is it the brass tube on yours?

[James_Bond]

Re: WE (RaTech) npas

yes it is, version two.