Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Fixing a leaky Open bolt PDW mag

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Fixing a leaky Open bolt PDW mag

    Hi,
    I have a leaky PDW mag, gas is venting badly through top rubber seal. Can anyone help?
    Thanks
    Its PDW Time!
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Take the main vavle out and check the orings are seated properly, mainly the second one from the end as it were. If they are fine plenty of silcon lube and leave over night, if still no joy, new oring time
    Originally posted by Bluegill
    5 years Backyard Skirmishing...

    I hope that's not an airsoft euphemism
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Fixing a leaky Open bolt PDW mag

      Weired thing is the o rings are fine and i have sort of ODed on the silicone! I dunno maybe the valves?
      Its PDW Time!
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: Fixing a leaky Open bolt PDW mag

        I think i just need to replace the valve
        Its PDW Time!
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        Previous template Next

        About the Author

        Collapse
        SniperXX Find out more about SniperXX
        Working...
        X