tanaka m40a1

[phil]

hi all...has any tips on how to get more power from a tanaka gas m40a1 rifle ?

ive screwed the spring adjust all the way back and using green gas

thanks

[dope_on_a_rope]

Re: tanaka m40a1

Guessing this is a newer model? If so, you should be able to remove a part of the nozzle. Inside the nozzle on the bolt, you should be able to see a separate part narrowing it down to a smaller bore. This can be knocked out with a hammer and screwdriver. Not sure which direction though, and careful you don't know the nozzle sideways while you're doing it.