Tanaka SAA hammer problem

[MiniSnipa]

So Guys i have a problem heres the situation

When you cock the hammer back it has 3 stages

Safety
Half cock
Full cock

When i cock it back currently it slips, you are meant to feel tension if you go slow, when cocking back to full cock (ready to fire)

however when i go to full cock, then back to half cock, and then back to full cock slowly i can feel that tension again and fires beautifully

How to fix

Cheers hope i explained it clearly

[MiniSnipa]

Re: Tanaka SAA hammer problem

Never mind

please close i have found that the hammer has lost its third fork (full cock) and a screw has chipped

[MiniSnipa]

Re: Tanaka SAA hammer problem

Close still but an update to anyone thats interested

pro tip never force fire or de cock from half cock

puts too much stress on this piece causing it to chip n get crapped making it miss the spur on the final spin and thus slipping

[YankKiller]

Re: Tanaka SAA hammer problem

Damn mate that is not cool, have you managed to source the part ok? I know it's damn hard to get bits for these! Don't lose hope, and remember SAAs rule!

[MiniSnipa]

Re: Tanaka SAA hammer problem

If the filing doesnt work (either edging if that fails rounding it) if they both fail then i will have to wait till the site i know gets them in stock

if its not that, then wow im stumped cant think what else it would be