KWA P226 PTP hammer spring?

[adam666]

hi guys so ive had this pistol from new for around 5 months and its started to not cycle properly with a full mag of gas(i have been using the same gas since day 1 and maintained my pistol eery 2 day skirmishes). im told the hammer spring is the issue so wondered if anyone knew where i can get an uprated hammer spring from/ which on the market will fit? any help greatly appreciated

Jester Recon 6

[kruck]

Re: KWA P226 PTP hammer spring?

I doubt its the hammer spring, its unlikely to have worn out over a period of 5 months. I'd take down the hammer assembly and clean it all out, reassemble and see if it helps.

Unless its still under warranty, in which case send it back.

[M.I.A]

Re: KWA P226 PTP hammer spring?

Im with the chap above, i very much doubt its the hammer spring causing problems

[adam666]

Re: KWA P226 PTP hammer spring?

ok ill give that a go im just going on what ive been told by others it could be.

Cheers Again