Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

TM 226, BB's rolling out barrel..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TM 226, BB's rolling out barrel..

    Hi there,

    Ran into a problem with my P226, BB's just seem to roll out the barrel for some reason.. Barrel is pristine clean and everything seems to be fine...

    Any ideas?

  • #2
    Re: TM 226, BB's rolling out barrel..

    check the hop up \ rubber.

    when was it last changed.
    Are the shots going all over the shop ????
    The Airsoft Knowledge Base Project is where we will be building up information, guides, fixes and other Airsoft knowledge.

    Comment


    • #3
      Sounds like your hop rubber, good excuse to get a nine ball one


      Lastchancers.co.uk
      Lastchancers.co.uk

      Comment


      • #4
        Re: TM 226, BB's rolling out barrel..

        like others have said it sounds like your hop rubber

        the hop rubber doesn't just impart back-spin it is the chamber that holds the bb in place until the gbb is fired

        if you clean the barrel too thoroughly you can damage the hop and it wont hold a bb in place.

        or if, while cleaning, you use too much silicone it can cause the gbb to double feed which would mean one in the hop chamber and one free to roll out of the barrel

        if you need a replacement hop rubber then oem TM ones cost about £5 and nineball ones cost about £15
        Last edited by hotelkilo; 29 December, 2011, 17:23.

        Comment


        • #5
          Re: TM 226, BB's rolling out barrel..

          Is the hop actually on? Been there...

          Comment


          • #6
            Re: TM 226, BB's rolling out barrel..

            Yes pan, annoying fail moment.

            How is the gun cycling? Crisp? Or sluggish?

            Comment

            About the Author

            Collapse

            RastaBlasta Find out more about RastaBlasta
            Working...
            X