Mk.23 my Mag wont come out

[Ferras]

i fired my mk.23 and all the gas ejected from the mag in a single shot...
now the mag wont come out of the mk.23...
it is GBB KSC...
please help

[rik]

Re: Mk.23 my Mag wont come out

I can tell you what's happened - When you've pulled the trigger it's not cycled the mechanism the whole way. The bit in the handle that pokes the valve on the magazine to let the gas out has not finished its forwards and backwards movement.

I would try pulling the trigger a few times, and then trying again. If that doesn't help, try racking the slide - but don't force it.

If neither of those help, then I'm out of ideas without seeing a KSC one - I've only seen the TM.

If you do figure it out, let us know what it was.

[jagillham]

Re: Mk.23 my Mag wont come out

Usually a case of fiddling, pull the slide back gently and try pulling the mag out from the pistol.

[rik]

Re: Mk.23 my Mag wont come out

The KSC one has a working decocking lever doesn't it? If so, try that too.

[Ferras]

Re: Mk.23 my Mag wont come out

Unfortunately nothing working

[Ferras]

Re: Mk.23 my Mag wont come out

Heya guys, Found the problem.

If you look at the picture, number 2 is a small pin and number 1 is where it got jammed (small grey circle inside). Just get a flat head screwdriver and push it back into place. Ironically it happened to my Glock 23F about 3 years ago. Somethings just get forgotten. Hope this helps anyone.