Making a G&G 416 into a M27 IAR

[Chrismg]

As the title suggests I would like to take my G&G T4-18 and modify it into a M27 IAR.

According to the information I have found online the M27 is essentially a 416 with a 16" barrel and an 11" RIS. I think changing the outer barrel should not be too much of an issue, however I am not so sure about the RIS.

If anyone has any information on what RIS units between 10.5 and 12 inches long that are compatible with the G&G T4-18 I'd be most grateful.

Cheers,

Chris

[Chrispy]

Re: Making a G&G 416 into a M27 IAR

I've recently been looking into replacing my G&G 4-18 rail system, and as far as I can tell the receiver has standard threading for handguard attachment so M4 free float rails should fit.

[gijohn2]

Re: Making a G&G 416 into a M27 IAR

Just find a agm/jg rail and cut it down to size and bolt it on

[eddym]

Re: Making a G&G 416 into a M27 IAR

any free float rail system should work fine, as you dont have a delta ring on a t4-18