G3 questions

[carlx2]

hy guys i was wondering if you could fit a m4 hop up on a g3
and im trying to find a decent motor similar to the guarder high speed revolution just with a bit more torque.
does any one have any advice.
and what type of pistol grips can i use or does it have to be a g3 one

---

g3 ris.jpg

M105 ST Spring
Guarder Enhanced GearBox
Element Silent Piston Head
LONEX Enhanced AEG Piston ( 10 Steel Teeth
6mm Stainless Steel Ball Bearing
Guader High Speed Revolution
LONEX Cylinder for / G3
LONEX Aluminum Cylinder Head
LONEX Air Seal Nozzle
Action 30 X 180mm Silencer
Low Profile Mount
G&P Military Type 30mm Red Dot Sight
100:300 helical gear set

[Boo-Sabum Ben]

Why would you want to fit an M4 hop unit in a G3?

[carlx2]

Re: G3 questions

i just do not like the hop up in it i dont really know why but i have noticed that you have more choices of m4 hop ups than g3
and m4 hop ups are cheaper lol

[eatthis]

Re: G3 questions

g3 hop feels much better to me and easier to adjust

[a_flea]

Re: G3 questions

G3 hop is one of the best I have used! Not sure what magic you're expecting?

[carlx2]

Re: G3 questions

its not magic im just looking for versatility lol there are more m4 hop ups available than g3 ones and cant find a metl hop up that doesn't cost loads

[Boo-Sabum Ben]

Re: G3 questions

1: Metal hop up units offer no real advantage, unless you are very regularly disassembling the hop unit
2: M4 hop unit designs aren't really all that good
3: it would be a pain to do

[carlx2]

Re: G3 questions

ahh ok ill probably stick with my original then
im still trying to find a decent motor with the same speed as a guarder on a 110 spring i just want abit more torque to try and get that high pitched motor sound down

[carlx2]

Re: G3 questions

bump ..
i have just bough a element max speed motor does any one know if it would work well with 100:300 gears on 9.6 v batteries and m105 spring ?

[eatthis]

Re: G3 questions

just try it fella

[carlx2]

Re: G3 questions

i will i just dont want to ruin my gear box or gear set lol

[a_flea]

Re: G3 questions

If it's set up right you shouldn't have a problem. Double check it all runs smoothly in the box before running it live.

[seansamurai1]

Re: G3 questions

High torque gears on a high speed motor might result in sluggish trigger response.

[carlx2]

Re: G3 questions

well i have 3 other sets of gears , a set of JG gears / and the set you get from the 20 quid tune up kit , as well as a set from my old fn 2000 ?

[Boo-Sabum Ben]

Just stick the jg gears in. They'll be perfectly fine!