Accucel 6 power supply

[spascat]

Just bought a tenergy accucel 6 charger but it came with no power supply. Does anybody know what i should get
Thanks
Matt

[a_flea]

Re: Accucel 6 power supply

Contact they guys at a certain 'shop' that sells 'components', they'll sort you out with a 12V5A PSU and a jack adapter.

[Jez Armstrong]

Laptop chargers work. I use my hard drive power cable

[spascat]

Re: Accucel 6 power supply

Can i ask what charger you use. I tried my dell one and had no luck
Thanks

[Jez Armstrong]

Its a western.digital hard.drive power supply

My friend also had luck with his.laptop.charger

[Darkmikey22]

Re: Accucel 6 power supply

so you saying they dont send a power lead with it at all?

[a_flea]

Re: Accucel 6 power supply

You normally get to choose, it comes with DC croc clip connection as standard...

[Darkmikey22]

Re: Accucel 6 power supply

oh.. ok, as was possibly looking at one of these

[a_flea]

Re: Accucel 6 power supply

oh.. ok, as was possibly looking at one of these

At a certain shop they're ~£35 without PSU, ~£50 with.
Definitely worth the money.

[No1_sonuk]

Re: Accucel 6 power supply

I use an old CB/amateur radio power supply for mine.

[w02057]

Re: Accucel 6 power supply

I have an Accucel 6 and use this mains to 12v 2A DC adapter to charge my 1400mAh lipo at 1A charge current: http://www.ebay.co.uk/itm/AC-100V-24...item45f8322313. It has a 5.5mm wide jack which is the correct size for the accucel 6. Works fine as long as you don't set the charge current on the accucel higher than 2A. I choose to charge my lipo at 1A to be on the safe side, I would rather wait an extra half hour to put less strain on the cell.