Madbull ace socom stock on Magpul Moe?

[Peter]

Hi guys just wondering how much work I have ahead of me to get this stock on my Moe
that's if it does go on?
I'm new to stripping guns apart and have an elephants touch so any help would be great.
As for now I am just watching some videos online to see how the gun comes apart
and goes back together.
Hopefully there is no sawing or filing to install it.
Thanks for any help in advance.

[julesbloke]

You shouldn't need to do any real takedown of the gun. You don't need to remove the gearbox or anything like that :-)

It should just be a case of undoing the screw in the back of your current stock. If it's a stock tube you'll need a long screwdriver to get to it down the stock. The tube will slide off the back of the gun, put the Ace stock in its place and tighten on!

[Peter]

Re: Madbull ace socom stock on Magpul Moe?

Hi mate thanks for the reply!
That would be ideal for someone like myself.
So I would just fit the ace stock over the old tube? Currently have the crt stock.
The videos I have been watching was the whole gun being stripped to get the crown lock off
and the springs out.

Thanks.

[julesbloke]

The Ace stock has its own stock tube, so you'll need to remove your current one.

Slide the CTR stock off the stock tube, there may be a plate on the end of the tube that needs removing. Then you should be able to see the screw if you look down the stock tube. Undo that and the stock tube will pull off. It should then be obvious how to put the Ace back on there!

[Peter]

Re: Madbull ace socom stock on Magpul Moe?

Hi thanks for the reply again.
So I do not need to take the receiver apart to get to the screw behind the stock tube like in the videos
I have been watching?

[julesbloke]

Nope!

[Peter]

Re: Madbull ace socom stock on Magpul Moe?

Thanks again I will let you know how I get on with it.


Cheers.

[Peter]

Re: Madbull ace socom stock on Magpul Moe?

Thanks For All The Help!
All Fitted With No Hassle

Cheers.