Rails for Mini UZI KWC

[Hardballer1911]

Hi guys here is my new project the KWC Mini UZI.
So first thing I did was put a rail under the foregrip. I filled the gap where the bayonet lug was with polymorph plastic. Within the plastic there is a nut, so that the rail could be screwed into. The rail is from a Dan Wesson.





Next I decided to figure out how to get some optics on the UZI. Searching ebay for rails I came accross an HK MP5 optics rail, that looked suitable. From the pics you can see I cut a third of the rail off and most of the "feet." The rail just clears the sliding piece that the bolt handle is attached to and the whole thing is counter sunk screwed from beneath the receiver plate. The action is no way impeeded by the rail.