Prowin CNC hop up

[slappy]

Does the Prowin CNC hop up provide any benefits over a stock G&G plastic hop up?

[sj_asc]

Re: Prowin CNC hop up

The biggest advantage to the M4/16 Prowin hop chamber is the method of adjustment, the dial is less prone to self adjusting than the side wheel you get on the traditional AR chambers. Once you have these set up right they are well worth the money.
Like with many of the other Pro-win chambers these tend not to be spaced well from the chamber for the best seal as a drop in, you either get good seal and poor feeding, or poor seal (low fps). If you're lucky it will be fine first time. If it's not right first time it will simply require fine tuning of the chamber spacing and or experimenting with different length air nozzles.

[slappy]

Re: Prowin CNC hop up

Thanks for the advice

Based on that, I've ordered 3 in to have a play.