Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

custom VSR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • custom VSR

    Im thinking of putting a custom VSR together but if anyone has any thoughs or sugestions on what parts to use etc share them
    Gangsta lean, it's not all bad...

  • #2
    Re: custom VSR

    there are so many aftermarket parts out there that it is really up to your preference what parts you use for the look of the gun, as for the internals it all depends on your budget, start with the more important parts and then go as far as your budget will allow. Also the more you spend the better the parts, if you go pdi or laylax your getting quality, i would say spend more on the more important internals. A nice barrel, hop, put some high performance parts in the cylinder and then the trigger/teflon cylinder. that is what i would i would do.

    cheers,

    taylor.
    Old Feedback: http://forums.zeroin.co.uk/showthread.php?9500-TaylorB

    Comment


    • #3
      Re: custom VSR

      thanks taylor i was thinking about using the fortress m40a3 stock and go from there with a 500-550fps spring
      Gangsta lean, it's not all bad...

      Comment


      • #4
        Re: custom VSR

        I couldn't quite tell if you realised this, but you can't just throw in a 500fps spring and expect results...

        Have a look at this: http://www.zeroin.co.uk/showthread.php?t=5069

        That will tell you everything you need to know for upgrading it internally. If you have any questions after reading through that then feel free to post on the thread - it helps others as well.

        As for the Fortress stock, from people I have spoken to, it has gotten some very bad reviews, and some batches have even been released with what would be an as standard crack down one side. Spend your money else where.

        Hope that helps,

        Alex (mj23lj)
        Trader Feedback:
        New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
        Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

        Comment


        • #5
          Re: custom VSR

          Like on a smokeys stock, a caw wood stock, or a different custom wood stock. :p
          Old Feedback: http://forums.zeroin.co.uk/showthread.php?9500-TaylorB

          Comment


          • #6
            Re: custom VSR

            Plus anything over 500 feet a second, wont be allowed at ANY site in the UK.

            Comment


            • #7
              Re: custom VSR

              Originally posted by Taylorb View Post
              Like on a smokeys stock, a caw wood stock, or a different custom wood stock. :p
              +1, if you can get your hands on a Smokey's Stock System you would make many people very jealous.

              Originally posted by owainthegreat View Post
              Plus anything over 500 feet a second, wont be allowed at ANY site in the UK.
              Many sites tend to be lenient with snipers tipping over 500fps, as long as it was 525> then I'd say you'd be fine. As long as you are responsible with your min engagement distance, then you should be fine.

              I will say this though, you will notice almost no improvement between 500 to 525, so if you can get 500fps, then go for that.
              Trader Feedback:
              New Forum: http://forums.zeroin.co.uk/itrader.php?u=5557
              Old Forum: http://forums.zeroin.co.uk/showthread.php?9461-mj23lj

              Comment

              About the Author

              Collapse

              omgitzjamiiee You can shoot me, but you just can't mother fuc*ing kill me. Find out more about omgitzjamiiee
              Working...
              X