We 5.1 hi capa problems help please

[minisam92]

Basically I've got 2 we 5.1 hi capas they started shooting a bit inconsistent so I thought I'd change the hop rubbers. I've done this and now they fire full auto until the mag is empty of gas or bbs
Any thoughts as to what could have caused this ?
I've tried fitting a spare sear and hammer spring to them and it doesn't make any difference
Both lowers work fine when the slide isn't on
Any help will be appericated
P.s sorry about the essay but I need to try and fix them for a game tommorrow

[Paul55]

Re: We 5.1 hi capa problems help please

I seem to recall that the 3 pronged leaf spring in the rear of the rip can cause this.. I think you need to tweak the separate tongues to give more tension.

I hope you understand the gobbledy gook

[minisam92]

Re: We 5.1 hi capa problems help please

That's what I was thinking bit of for them both to go at the same time though just need to find. Some where that sells them now

[minisam92]

Re: We 5.1 hi capa problems help please

Cheers Paul 1 of the springs bent to shape having no luck with the other atm

[jonny lovegrove]

Re: We 5.1 hi capa problems help please

There's a hicapa specialist shop that has em. Let me just grab a picture of what I found to be the correct position for my 1911

Sent from my SM-G900F using Tapatalk

[Paul55]

Re: We 5.1 hi capa problems help please

Found this on YouTube, I know it's for a TM but I believe the principles the same.

https://www.youtube.com/watch?v=Po5clVRdrxg