ics m4 upgrades to hop or skip

[Gavin]

Hi guys
i recently sold my loved ics m4 and bought another ics m4 but am pissed due to the difference between them.
as far as i am aware the only difference was a madbull tight bore.
but the range/ accuracy is massive ive chronod my new m4 and it was only kicking out 250 fps mmmmmm
ive now changed spring to a systema m100 and exspecting fps to go up
but my question to you lot is the hop.
should i replace the lot or just the hop and nub ?
was looking at the madbull 3 in 1 unit with a python barell ?
will this give me what i want ?
freinds say to use the element hop ?

any help on the perfect hop barell combo would be appreciated.
gav

[CK]

Re: ics m4 upgrades to hop or skip

I dont rate the element hop at all...get the madbull hop unit, with either a promy or madbull tightbore.

The madbull hop unit (with the exception of the sopmod one) is the best hop unit I have used.

CK

[Gavin]

Re: ics m4 upgrades to hop or skip

I dont rate the element hop at all...get the madbull hop unit, with either a promy or madbull tightbore.

The madbull hop unit (with the exception of the sopmod one) is the best hop unit I have used.

CK

thanks mate
iwas reading a post which said that the madbull hop was a bi*ch to fit on ics m4's

[Montesa77]

Re: ics m4 upgrades to hop or skip

ICS are a bugger to fit any other parts like Magpul and Systema ect.

[Gavin]

Re: ics m4 upgrades to hop or skip

ICS are a bugger to fit any other parts like Magpul and Systema ect.

thats what i thought

[Gunslinger]

Re: ics m4 upgrades to hop or skip

i have a promy tightbore and a firefly hop and nub with the standard chamber in my ics m4 it works spot on good range and very accurate

[tisane]

Leave the unit itself, its more hassle than its worth.
The rubber itself is the one downside to the ICS M4.
However just get a few views on what rubber to fit in it, i brought a v2 python madbull rubber and H nub for mine. However when i tried to fit the rubber it was stupidly tight to put back together so i cut a small ammount off and lubed the living daylights out of it, once it was all put back together and lube removed i might aswell have been firing from a m203 it was that inacurate.
Went back to my TM rubber tightbore and the H nub and it fires like a dream brilliant acuracy with .25s even at range.

[Gavin]

Re: ics m4 upgrades to hop or skip

Thanks guys help for the perfect combo is much appreciated

keep them coming the most mentioned combo will be the one my m4 will get as a early christmas present

[bert uk]

Re: ics m4 upgrades to hop or skip

i had an m4 ics with madbull tb and tm hop rubber/nub,and now i have the same in my ics m16...same performance..with m100 gives 335fps.range is great too.:D

[Gavin]

Re: ics m4 upgrades to hop or skip

Leave the unit itself, its more hassle than its worth.
The rubber itself is the one downside to the ICS M4.
However just get a few views on what rubber to fit in it, i brought a v2 python madbull rubber and H nub for mine. However when i tried to fit the rubber it was stupidly tight to put back together so i cut a small ammount off and lubed the living daylights out of it, once it was all put back together and lube removed i might aswell have been firing from a m203 it was that inacurate.
Went back to my TM rubber tightbore and the H nub and it fires like a dream brilliant acuracy with .25s even at range.

i had an m4 ics with madbull tb and tm hop rubber/nub,and now i have the same in my ics m16...same performance..with m100 gives 335fps.range is great too.:D

buying a element hop of this forum £4 ..worth a go ahh
if its crap ive only wasted 4 quid

[Montesa77]

Re: ics m4 upgrades to hop or skip

More airleaks than a sieve.

[Gavin]

Re: ics m4 upgrades to hop or skip

More airleaks than a sieve.

haha verry funny
what you recomend then

[bert uk]

Re: ics m4 upgrades to hop or skip

buying a element hop of this forum £4 ..worth a go ahh
if its crap ive only wasted 4 quid

you mean an element hop rubber?cos the whole hop wont fit.good luck with that!

[Gavin]

Re: ics m4 upgrades to hop or skip

you mean an element hop rubber?cos the whole hop wont fit.good luck with that!

yeah just the rubber

[bert uk]

Re: ics m4 upgrades to hop or skip

the element rubber with the tightbore should be ok.:D

but a tm hop rubber and nub is £5.50!