G36 Stock Screw- GONE!

[Isolate]

Help! I just unscrewed the little screw on my TM G36c in order to remove the stock, and I've dropped the damn thing! It's so small I can't find it anywhere, and I have no idea where or even if they are sold seperately.

Any Ideas?

[Alex10]

Re: G36 Stock Screw- GONE!

the stock is held on by a pin on the right side of the stock, where it pivots,
well it is on all i have seen.

[Sarcasticus]

Re: G36 Stock Screw- GONE!

If you mean the little grub screw that hold the stock pivot pin in place, I have done the same thing myself. All you need to get is a 3mm grub screw same as used on radio control cars to hold the pinion onto the motor.

[Isolate]

Re: G36 Stock Screw- GONE!

yes, that was the screw i meant. Luckily enough I found that it had fallen into my gun, had to take the gearbox out to find it. But thank you for telling me where I can find one if I'm not so lucky next time! :D