L96 cheep Fps upgrade, and M4 (mosftet/ fuse)

[181jenkins]

ok so im thinking about putting some rubber/plastic spacers/washers at the end of my Spring guide to up the fps a lil(stock spring, spring guide, piston) would this work and would you advise it??


as for the M4 goes im getting new wires for it, so im thinking should i use a fuse? and advice on this would be good thanks always used one but is it needed?

and mosfet. i have a mosfet not sure if im going to use it or not, if i do, should i use a fuse with it or not (trigger master)?


3 diffrent questions


edit: will only use like 2 spacers/washers so Spring will still compress

thanks for the help and info guys and girls!

[mountainmark]

Re: L96 cheep Fps upgrade, and M4 (mosftet/ fuse)

If you have the cheap bipod that comes with the L96 unscrew one of the legs and you will find two springs. Take the shorter spring and put this on your spring guide followed by the main spring and reassemble. Bingo 498 fps! (at least that's what mine is now doing). This will make the bipod unstable as it now won't lock open but as I never use it it didn't really matter to me. Hope this helps.