pss 10 zero trigger(vsr) problem. spring snapped!!!

[dantwnn]

Hi there everyone. Wonder if anyone can help.my vsr stopped firing and opon inspection found that the sear spring inside the zero trigger has snapped. I need to find a repplacement or my £199 trigger is dead:-( any help greatly apprieciated. The springs are bout 4mm long with loops on either end.thanks dan

[private parts]

Mines broke aswell, common fault apparently, someone suggested a tappet plate spring but it was too long

[Crude Skinny B]

Re: pss 10 zero trigger(vsr) problem. spring snapped!!!

If a tappet plate spring was too long you could try cutting it down and then just relooping it by bending one of the coils

[sniper1982]

Re: pss 10 zero trigger(vsr) problem. spring snapped!!!

i had the same problem, snapped after 3 game days - buy an AEG V2 gearbox spring set (about £4).

There's a couple of springs in there similar to the tappet plate - simple use the smallest. That's what i did 2 years ago and still working fine.

[dantwnn]

Re: pss 10 zero trigger(vsr) problem. spring snapped!!!

I'll do that cheers got some verius springs coming my way from peterbough ;-) hopefully one will fit. Cheers guys