TM L96 disassembly guide?

[Kodiak]

Hi guys. My brother has recently acquired a brand new TM L96, a PDI precision cylinder set and a PDI upgrade spring. I need help disassembling it and putting the upgrades in. Can anyone please help?

[ejtrent]

Re: TM L96 disassembly guide?

Err..


There are some good youtube vids, sniper rifles are massively easy to strip.. one mo


http://www.youtube.com/watch?v=2ynrxBi7Sg0


VSR-10 internals are supposed to be nearly the same (not identical)

Upgrade with caution..

[Joshy-R]

Re: TM L96 disassembly guide?

http://www.airsoftforum.com/board/L9...y-t156035.html

That might help. im doing the same with my tm l96 at the moment but remember the check points on the x-fire site, http://www.x-fire.org/tm_l96/e.precision_vc.html, at the bottem under checkpoints

[Joshy-R]

Re: TM L96 disassembly guide?

And no the internals arent compatiable with the VSR version

[Joshy-R]

Re: TM L96 disassembly guide?

http://www.redwolfairsoft.com/******...l?reviewID=238

[Rogue Trooper]

Re: TM L96 disassembly guide?

If your upgrading this gun BEWARE!!
My friend on another forum has upgraded his with the PDI chamber set and second sear etc, worked like a dream for a while punching out a consistant 500fps.... BUT

His gun is now slam firing due to the extra spring pressure wearing out the trigger sear, this can only be fixed if someone makes a new trigger sear or if you buy one of the new upgraded trigger groups, bearing in mind that the Zero trigger unit (closest comparison) for the VSR is about £170, this will be an expensive upgrade!

Due to this i have shelved upgrading mine till better parts are out
Al