WELL mb06/urban sniper curving bbs

[jackatsa]

My sniper used to work great, i clean and lube it regulary to ensure the best performance possible. however of late when i fire it ,the bbs curve to the right, sometimes they do it drastically other times not so bad but as some people will know this is an absolute pain when you have 1 shot to hit someone! anyone know what the problem could be ? The hop is clean and hasnt split but clearly there is something else wrong...

[Jack.Murnin]

Re: WELL mb06/urban sniper curving bbs

Is the hop set? Might have been knocked out of the norm when you were cleaning it.

[Richhill]

Re: WELL mb06/urban sniper curving bbs

maybe the hops twisted a little. strip and rebuild the lot

[MiloXC3]

Re: WELL mb06/urban sniper curving bbs

Does it use a VSR-style hop up system? If it does you will need to make a TDC adjuster to solve the problem.

[sniper1982]

Re: WELL mb06/urban sniper curving bbs

No, the MB-06 doesn't use a VSR style hop.

More than likely the plastic hop lever has snapped. It's the most common issue with these APS based rifles. It happens when you over tighten the grub screw to apply hop.

Or

Possibility the hop bucking has torn.

These are the usual symptoms for random curving.

[jonny lovegrove]

Re: WELL mb06/urban sniper curving bbs

or as with the mb01 ect, the unit is sat at a slight angle which caused the beebs to go off target

[private parts]

Re: WELL mb06/urban sniper curving bbs

or wind? depends on bb weight

[Jez Armstrong]

Re: WELL mb06/urban sniper curving bbs

turn the barrel clockwise and turn down the hop