Upgrading the L96

[Blueprintt]

Ok, so I have a warrior mk.2 L96 that is currently in pieces awaiting internal upgrades.

I was looking at buying these parts for it:

1. Laylax Zero Trigger
2. HP hop up unit
3. DB Custom 6.01 tightbore

I was wondering if anyone can tell me whether these parts are compatible with each other without any modifications.

Many thanks,
Blue

[guard-sniper87]

Re: Upgrading the L96

if you look on the shop mate there a trigger on there . the best inner barrel for it is an edgi .01 , i think the HP hop unit will fit mate but not 100 % sure

[Blueprintt]

Re: Upgrading the L96

Ta for the quick reply.
I don't suppose you could provide me with a link for a decent place to buy the edgi .01?
Thanks again.

[guard-sniper87]

Re: Upgrading the L96

pm'd

[Evolution365]

Re: Upgrading the L96

Zero trigger will fit. Check with the hop as the adjustment screw bit doesnt line up on some makes - Im not all that sure. All barrels should fit, cant see why it wouldnt. Out of interest, where is this hop unit coming from?

Cheers.

[guard-sniper87]

Re: Upgrading the L96

evo my friend you have a pm
regards hp hop unit

[richard murray]

Re: Upgrading the L96

What spring you aiming for?

[Blueprintt]

Re: Upgrading the L96

Right well, I know i'm definately going with the zero trigger.

I have also decided to go for an EDGI barrel.

Now, they offer a barrel that is cut to fit PDI style hop units and one that is for the original hop unit that comes with the gun.

I was wondering if there is any major advantages of buying a different hop up rather than just using the one that comes with it.

As for springs, i'm going to keep the one that is currently in it as it is working well and is fine for my local limits.

When I do come to replace it I will aim for something that gives around the 450-500 fps mark.

[guard-sniper87]

Re: Upgrading the L96

the advanced hope up rubber gives more secure/sturdier adjustment more consistant shootin . .

when u find it is time to upgrade spring i'd go for the 150 spring mate

[Blueprintt]

Re: Upgrading the L96

Alright cheers for the information.
So its worth buying the EDGI barrel thats cut to fit the PDI hop and get that instead of the original?
150 it is, ta.
Oh and sorry for all the questions, I always like to make sure I know exactly what I should do when it comes to upgrading internals.

[guard-sniper87]

Re: Upgrading the L96

no worries mate . id defo get the EDGI will be sooo much better in long run and the pdi hop will be good to mate

[Blueprintt]

Re: Upgrading the L96

Alright thanks a lot for your help, EDGI & PDI it is.
Ta.

[guard-sniper87]

Re: Upgrading the L96

no worries mate

[propaintballa]

Re: Upgrading the L96

Decided on some BBs?

[Blueprintt]

Re: Upgrading the L96

Well i've been using excel .28s for the past year and they've been fine. I am going to change them though to either SGM .29s or excel .30s depending on how much money I have at the time.