Harris on a 96

[Green-Giant]

How many people have done this?
Does it work ok with the adaptor pin, because the harris doesn't have a flat surface the sides are at 45 deg

[jfox61]

Re: Harris on a 96

Works fine. You can find different adaptors for different guns online. Usually real steel sites in the states, but they are usually very cheap to buy.

[Green-Giant]

Re: Harris on a 96

i don't want it to go in the front like the standard Type 96, i fancy it going on bottom so it looks like a L115A3 instead, didnt know if it would simply screw into the stock with a nut on the inside, would the sides of the bipod stop it securing tightly?

[jfox61]

Re: Harris on a 96

Doesn't need to go in the front as i say Harris make adaptors to fit the pod onto any gun with a ris.

[jfox61]

Re: Harris on a 96

Its a dot com site so just google Harris bi pods for the site. It will cost around 20-30 dollars for one to fit a L96

[Green-Giant]

Re: Harris on a 96

brilliant thanks mate

[jfox61]

Re: Harris on a 96

Don't mention it.

[guard-sniper87]

Re: Harris on a 96

there are also mounts that will actually fit the small lug on the under side of the L96, drill a small hole in that and it acts like the VSR sling loop ,

but maruzen do the block adaptor , also search countryman gun club in google as they have them in