aps-2 and warrior l96

[guard-sniper87]

hey guys i dont know if im being nieve but do any of the internal parts for the aps-2 fir or are compatible with the warrior mk2 l96

[mj23lj]

Re: aps-2 and warrior l96

Yes, I believe most are... I can't think of a part that isn't? Anyone?

EDIT: Thinking about it, possibly the trigger unit, I think that's the only thing.

[guard-sniper87]

Re: aps-2 and warrior l96

ooo so i can get an upgrade piston a cylinderhead and they should fit .

cheers alex

[pmac(BT)]

Re: aps-2 and warrior l96

right some bits are compatible here they are.(tested)
piston
springguide(though you will loose your cocking indicator)
springs
cylinder heads
sears

parts that may be ,are(ive not tested these parts)

zerotriggerunits(slightly different but should work)
hopunits/barrels(though aps2 barrels are shorter)
standard aps2 trigger unit may fit the l96(with the saftey removed)

parts that cant be changed are

cylinders (due to the different handle attachment types,aps2 differs from the two types of l96 cylinders)
l96 trigger unit is probably to wide to fit the aps2 aswell

also there are tollerence differences between the maruzen and the clone versions,which means some parts dont fit well,there very small on most parts but some may need work to fit.
the recievers cant be changed between stocks aswell,due the the attachment points being about 5mm out at the rear(i think)

this has all been done by myself as i used to own a fully laylaxed/pdi upgraded l96. a clone warrior l96 and still have a aps2 based gun(custom lee enfield)

[guard-sniper87]

Re: aps-2 and warrior l96

o cheers pete . are they the same quality . as pure 96 parts

[pmac(BT)]

Re: aps-2 and warrior l96

do you mean the clone parts compaired to the maruzen or upgrded parts
or the aps compaired with the type96 parts

the clone parts arent as good quality as the mauzen,but i wouldnt say that far off
if the latter there exactly the same quality

[guard-sniper87]

Re: aps-2 and warrior l96

mmm nice ive dremmeld the cylinder head at the min but wanna get the pro cylinder hea for it and get new piston as has stock one in it

[bravotwozero]

Re: aps-2 and warrior l96

The piston is compatiable? You sure?

Been looking for a decent one for a while. There is a piston for the 96 made by OK, but its pricey.

[guard-sniper87]

Re: aps-2 and warrior l96

the piston on the shop for the aps-2 is compatiable yeah as bitchtits says mate . plus it a higher pressure one then standard

[bravotwozero]

Re: aps-2 and warrior l96

Cheers.

Its a pain getting upgrade parts for l96, but youve just gotta dig around more! :D

[guard-sniper87]

Re: aps-2 and warrior l96

it not a pain just a small variaty of parts

[lothario]

Re: aps-2 and warrior l96

cobra airsoft do quite a lot of type96 parts that should fit in most cases. there a decent seller on the whole though obviosuly importing takes a while.

[pmac(BT)]

Re: aps-2 and warrior l96

just search for aps2 on most sites in hk, and i only know one shop in the uk that stocks alot of bits
www.x-fire.org do lots for every gun

[guard-sniper87]

Re: aps-2 and warrior l96

oooo cheers pete