Custom Barrel spacers

[bravotwozero]

I've been thinking of ways to make custom barrel spacers, which are better than the crappy stock ones you get.


So far, from looking at the forum i've got a few cool ideas, including a broom handle with a hole drilld thrigh the middle.

Would silicone work? Make some moulds and pour silicone into them?

Too rubbery perhaps?

Share your ideas!

Bravo

[Caveira]

Re: Custom Barrel spacers

I've always found that simplicity is king.

Wrap electrical tape round it in a few places, it's impossible for it to be off-centre as the tape wraps evenly round for each turn.

[guard-sniper87]

Re: Custom Barrel spacers

i did that mod ( electrical tape )

in my first l96 , the inner diameter of the rifle's outer barrel is 22mm , so make the barrel spacers about 21.88mm check with a digital micrometer ,

or if you have a g-spec do the same for that size outer barrel inner diameter ,

also , if using the tape , make 4 or 5 evenly spread along the barrel to creat great stability ,

or if making one , create a 4 inch long one and use two if can fit it in , to have a sterdy shoot line