Laylax PSS10 Springs Compatibility To The TM L96 AWS

[TM Sniper]

Right,

Does anyone know if the Laylax PSS10 (VSR-10) springs will be compatible with the stock piston and spring guide or the Laylax PSSL96 (L96) spring guide and piston ?

i know that i will have to drill out the cylinder pin to access the internals as its the same with the VSR-10 and is a fairly easy job if you have the right tools and know what your doing

Any info and help about the compatibility of the Laylax TM VSR-10 springs to the TM L96 AWS would be much appreciated

[guard-sniper87]

Re: Laylax PSS10 Springs Compatibility To The TM L96 AWS

nope they are not mate ,

they are different diameters ,

so stick with pss10 parts for the bar10/ vsr/gspec rifles

pss96 are different size only for the L96s from warrior and maruzen and some parts are for the aps2 system

[TM Sniper]

Re: Laylax PSS10 Springs Compatibility To The TM L96 AWS

hmmm... bit of a bad situation then with tokyo marui's L96 compatibility because Laylax has only got one spring out for the L96 and its a 90SP.
however i do hope that Laylax with come out with higher velocity springs for the L96 as the more powerful springs out at the moment are PDI and they require PDI spring guides i think.
what a bummer.

[guard-sniper87]

Re: Laylax PSS10 Springs Compatibility To The TM L96 AWS

no the TM l96 are completely different to every other type of spring out for sniper rifles,

so there are a few choices , either different cylinder choices,

[TM Sniper]

Re: Laylax PSS10 Springs Compatibility To The TM L96 AWS

ahh well thanks for the help anyway. much appreciated.