Sniper Upgrades (based on a VSR) and Further Guide

[riddick 1811]

Re: Sniper Upgrades (based on a VSR) and Further Guide

haha, i am very close with google, i will check it out

many thanks

[olives]

Re: Sniper Upgrades (based on a VSR) and Further Guide

I am planning on getting a vsr10 gspec and I am wondering if this is
enough for 400fps:
Laylax (PSS10) 120SP Spring
Laylax (PSS10) Barrel Spacers for G-Spec
Laylax (PSS10) 6.03mm Inner Barrel for G-Spec (303mm)
Laylax (PSS10) Spring Guide
Laylax (PSS10) Cylinder Head

or is there anything I will need

[mj23lj]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Trigger and Piston Sear
Spring Guide Stopper
Make sure you get 4x barrel spacers (they come in packs of 2)
Hop Up Bucking (Nineball or Firefly)

Hope that helps,

Alex (mj23lj)

[portermush]

Re: Sniper Upgrades (based on a VSR) and Further Guide

some of the vsr bipods have a ount that fits onto the sling mount. on zeroone they have many bipods but a harris style bipod (im not sure if its on zeroone) will definatly fit on without a drill.

hope this helps, sorry its confusing MKE

[chriscam10]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hi, first of all id like the say chears as this is the best upgrade guide i have ever read for the vsr 10.

i was wondering if anyone could possibly help me out. ive got a tm vsr-10 pro. it is standard atm. however i have ordered new trigger and piston sears, 150 spring, 6.04 tb barrel and some damping pads to help reduce the noise. is there anything else that i would need to keep the rifle accurate and reliable?

also how would i go about makeing some diy barrel spacers?

thanks in advance

[B.E.N.]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hi, first of all id like the say chears as this is the best upgrade guide i have ever read for the vsr 10.

i was wondering if anyone could possibly help me out. ive got a tm vsr-10 pro. it is standard atm. however i have ordered new trigger and piston sears, 150 spring, 6.04 tb barrel and some damping pads to help reduce the noise. is there anything else that i would need to keep the rifle accurate and reliable?

also how would i go about makeing some diy barrel spacers?

thanks in advance

Uprated hop unit, including rubber and regular maintainence...

To make a diy barrel spacer, carefully wrap duck tape around the barrel until it is built up enough to fit snugly into the outer barrel.

[chriscam10]

Re: Sniper Upgrades (based on a VSR) and Further Guide

thanks for the reply do you have any recomendations of what type of rubber and hop unit to get?

[HuntR]

Re: Sniper Upgrades (based on a VSR) and Further Guide

hop unit will be fine. But as for rubber it's personal preference. I myself always go with the laylax nineball, but my fps limit is 350. For 400 and over a hard rubber is recommended. So firefly or king arms would be the best bet i guess

[otakumike]

Re: Sniper Upgrades (based on a VSR) and Further Guide

does anyone know where i can get a Ka Hard Airseal Bucking from?

[mj23lj]

Re: Sniper Upgrades (based on a VSR) and Further Guide

HK, maybe the US. I've only ever seen them in the UK once, and that was well over a year ago (a site I can't remember sorry). Just search 'King Arms Red Air Seal Hop Up Bucking' and a few sites should come up...

[gouhen]

Re: Sniper Upgrades (based on a VSR) and Further Guide

guys, anyone knows where I can get a metal trigger guard for vsr-10? or plastic? i need a replacement for mine. thanks

[otakumike]

Re: Sniper Upgrades (based on a VSR) and Further Guide

cheers for that mate

[otakumike]

Re: Sniper Upgrades (based on a VSR) and Further Guide

the only one i seem to be able to find is the nine ball airseal one. do you reckon this one will work just aswell? sorry to seem like a noob but hot rubbers are the only thing ive had problems with when upgrading sniper rifles.

[HuntR]

Re: Sniper Upgrades (based on a VSR) and Further Guide

Depends what fps your running at. You could get away with a nineball upto 450 probably but it would wear rather quickly.

[guard-sniper87]

Re: Sniper Upgrades (based on a VSR) and Further Guide

the KA hop bucking are like hens teeth now ,

the best bucking you can get for a vsr/gspec is either a firefly or deepfire ,

they do extremly well at 460fps plus , and very hardwearing if taken care off correctly

and if your rifle is under 450 fps , why not stick with a TM hop tubber with h-nub, will be like the deepfire but cheaper and consistant also