Help Warrior L96 replacement rubber and a tirebore barrel

[kinglemon]

Hey guys need help to find what soft hop-up rubber will fit the Warrior L96
and what tire bore barrel will fit the Warrior L96 preferably Madbull.

Any idea's guys need serious help and advice

[The Dr]

Re: Help Warrior L96 replacement rubber and a tirebore barrel

If this is standard hop then I'm not sure about rubber but I know KM or something and I'm pretty sure laylax made some barrels which will fit the standard hop unit. If it's PDI or Hex hop unit you should of looked in the stickied post first.

[danhc]

Re: Help Warrior L96 replacement rubber and a tirebore barrel

arnt they standard aeg barrels? either way you can use a standard aeg hop rubber, best would be firefly or a guarder black should be ample best barrel would be a toss up between laylax and pdi, i personaly prefer laylax 6.03

[badas]

Re: Help Warrior L96 replacement rubber and a tirebore barrel

Every l96 i have ever had was never a standard AEG barrel or AEG hop rubber.

You can use a madbull 6.03 barrel providing you cut in grooves so it is identical to that of a stock barrel. Its an easy job and takes about 10 minutes.

As for hop rubber, your best to keep on using the stock one unless its naffed, then consider getting the Hex hop chamber and a new hop rubber or just ask on the spare parts wanted thread for a new stock L96 hop rubber

[kinglemon]

Re: Help Warrior L96 replacement rubber and a tirebore barrel

oh ye by the way guys the guns running at 345fps so i dont need a hard rubber

[badas]

Re: Help Warrior L96 replacement rubber and a tirebore barrel

your site limit 350fps?

putting in a tightbore should make it over 350fps so would require some spring snipping / buying a new one if you need to be under.

So do the madbul barrel mod i mentioned above and be happy with it

or find a site with higher fps rules :P

[kinglemon]

Re: Help Warrior L96 replacement rubber and a tirebore barrel

yes its a 350 fps site and yes i might replace the spring and ok ye i was thinking of Madbull tight bore