New edgi bar 10 problem!

[Mattmeddings]

Right... Everything is fitted properly, i cock the gun and it does not fire...

I Take the trigger of and start again..

First cock the bolt will be really tough to push back in and it will fire fine :D yay!

Second cock the bolt is nice and easy to push back in like it should be but then it doesnt fire :S

If i look at the trigger box the trigger sear has dropped when i pull the trigger like it should but the piston sear still isnt low enough to release the piston and i just get a crapy click like an empty pistol and it doesnt fire...:S

Any help would be appreciated

Much love!!
Matt

[StuartL]

Re: New edgi bar 10 problem!

Sounds a bit like the piston being stuck...?

[Mattmeddings]

Re: New edgi bar 10 problem!

i thought that but if i unscrew the tigger box an pull it away from the gun about 1 mill it fires :S its like my piston sear is a little to big lol...

[guard-sniper87]

Re: New edgi bar 10 problem!

easy fix,

shim the actuall box mounting screws so its sits lower,

you have mixed parts so compatibilty issues will and have occured

[Mattmeddings]

Re: New edgi bar 10 problem!

Cheers for the help guys liked and tried the shim idea and it worked but it stuck out to much and it wouldnd fit in the body of the gun properly .....

Changed the spring guide stopper from the edgi one back to my stock one and now it works a treat!! apart from his spring guide stopper (lol) i really rate this edgi upgrade kit (plus barrel), shoots like a dream now and the bolt slides soooooooooos smooth :P

Much Love
Matt

Edit: All my parts are edgi apart from the trigger box and hop/hop rubber