Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

VSR Feeding Issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • VSR Feeding Issues

    Quite often whenever I cock the rifle many bb's enter the barrel. Im using Devil Blaster 0.3s and its a TM. Any ideas what could be causing the feeding issues? Barrel, hop up?
    Knowledge is power

  • #2
    Re: VSR Feeding Issues

    I am b no meens an expert, having just bought a vsr recenty, yesterday was my first attmpt at disasemly. what I found w that if you dont fit the stock back on properly allined it mis feed or does not fed at al.
    AMY WINEHOUSE R.I.P

    G&P Silver M14 EBR Cheap
    http://forums.zeroin.co.uk/showthrea...om-going-cheap

    Comment


    • #3
      Re: VSR Feeding Issues

      usually there is a small plastic piece inside the hop unit which sits on a spring which usually wears down and allows more then one bb to be loaded

      i know RA teech have released this said part, but also make sure there is no excess lube around the hop unit entrance etc

      Comment

      About the Author

      Collapse

      Wolfie_Sniper62 Find out more about Wolfie_Sniper62
      Working...
      X