CA Trigger Problem

[JMusa]

hello
i have a classic army m15a4 tactical carbibne sportline.
basically the trigger wont make the motor spin.
sometimes it does and fires fine other times you pull the trigger and nothing happens.
also when nothing happens there is hardly any tension in the trigger.
any help would be appreciated.
many thanks
jmusa

[TheLazyMarksman]

Re: CA Trigger Problem

I think there's a dodgy connection from the battery to the motor, check the tabs connecting to the motor in the pistol grip, or see to the fuse, and/or both.

[JMusa]

Re: CA Trigger Problem

nope its definitely the triiger as the motor will turn when there is tension in the trigger
however when there isnt the motor just doesnt turn

[TheLazyMarksman]

Re: CA Trigger Problem

Try adjusting the height of the motor, see if it makes a difference. Did you think you may have damaged it in anyway or form? - If so please tell. - Or you could visit me tomorrow, if you're fine with that.

[JMusa]

Re: CA Trigger Problem

nope i havnt done anything to it
also im going down to twa on the weekend
so ill see if they can fix it

[TheLazyMarksman]

Re: CA Trigger Problem

Ask TKOS, I'm sure he'll know. - Also ask him to move this this thread under Technical Help and under AEG.

[JMusa]

Re: CA Trigger Problem

but this is tecnically passed as advice.
anyway ill ask around
or ill get martin to look at it tomorrow

[TheLazyMarksman]

Re: CA Trigger Problem

Yes, but also a problem - AEGs as far as I know don't normally do this. - Just make sure you have a back-up of some sort.

[JMusa]

Re: CA Trigger Problem

my back up shall be my speedloader
or i might just have to rent for the day

[gsipete]

Re: CA Trigger Problem

hi mate mine did this you pull the trigger and nothing. try pulling the trigger half way and see if it works as mine was going past the trigger connection.

[JMusa]

Re: CA Trigger Problem

the funny thing is sometimes it works sometimes it doesnt

[gsipete]

Re: CA Trigger Problem

when you pull the trigger all the way back does it click and wont fire?? give pull the trigger 1/2 way to 3/4 of the way a try mate.

[paulyboy]

Re: CA Trigger Problem

you may have a damaged trigger contact spring and/or your trigger contacts need a good clean i.e rub then down a bit with fine sandpaper sometimes they burn out and stop conducting/become verry tempremental

[JMusa]

Re: CA Trigger Problem

ok will any new parts be needed
and im going to try the trigger pull back now

[paulyboy]

Re: CA Trigger Problem

not really if its just burnt a little on contact like i said rub it back to shiny copper should be ok