Anyone else using kydex holsters - not the fobus types

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

Magazine pod for MP7:

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

Two of the previously shown MP7 mag pods on an SOE Gear belt:

[quad]

Re: Anyone else using kydex holsters - not the fobus types

Hey Ben, how have you've attached the molle-lok on your SIG holster?

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

The sweat guard has been off-set and has been folded over- the bolts have been passed through this and the molle-loks. Will probably devise another way of doing it though since it isn't the most elegant of mounting solutions (customer wanted it this way though).

[rubi-tong]

Hi Ben, try making a depression of the bolt pattern. I make mine out of ply and tape it to the pistol before pressing at the required Kant angle.
Once cooled it leaves a recess for the bolts to clear the pistol.
Mark

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

Thanks mate, I did recess the bolts slightly but on this occasion the drop was incorporated into the actual wrap around (customer requirements after all!). I will no doubt use the technique you mentioned in conjunction with a separate drop mount future

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

It's meeeeeee again!

[rubi-tong]

Like them matey, black and coyote look so good together.
Here's some low profile glock mag pouches, belt or molle mountable.
ImageUploadedByTapatalk1367594971.491766.jpg
And some M4 pouches
ImageUploadedByTapatalk1367595017.826014.jpg

[8vAlan]

MORE!

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

Glock 17 holster. Molle-mountable (vest shown because I no longer have a molle-belt...).

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

Did a new type of pistol magazine pod today:



Still as rough as badgers but will see how it goes

[Rich83]

Where can I find out how to make these?

Rich

Sent from my Nexus 4 using Tapatalk 2

[Snowdrop]

Re: Anyone else using kydex holsters - not the fobus types

Errrm, lets see. There's this clearly little known search engine called Google. I find it very useful.

[Patrolpointman]

Re: Anyone else using kydex holsters - not the fobus types

Where can I find out how to make these?

Rich

Sent from my Nexus 4 using Tapatalk 2

Google is your friend- I found a couple of good videos on youtube but in the end, trial and error on my part provided the best results.

You'll need a press- I made my own from some planks of wood, closed cell foam and some F-clamps. I use my kitchen oven with a temperature gauge (so you know how hot the oven really is) and a hair dryer to form the kydex itself. Then again, you can go all-out hi-tech with infra-red temperature guns, heat-guns and all sorts of fancy doo-wotsits.

Have fun and don't expect amazing results straight away!

[Rich83]

No need to be like that mate I thought there might be a thread on it but could not find it.

Sent from my Nexus 4 using Tapatalk 2