Lipo help, i know, again...

[hitman:D]

I have just recived this set up
http://www.zeroin.co.uk/showthread.php?t=76399
I have never had lipos before and am wondering hpw i go about charging them as there is not a lead that goes too deans from the charger, and only a hole for the balance bit,

All help needed
Thanks

[Fizzy]

Re: Lipo help, i know, again...

I believe that particually charger charges through the balance lead

[273BeLow]

Re: Lipo help, i know, again...

aye hook up the small connector, plug in the charger and the power light will come on and the green light should flash then go solid when charged.

Simples!

I like to ram a voltmeter into the gun/power connector so I can watch the voltage as it charges (handy way of seeing how long till it's done!) a 7.4 lipo will go to about 8.36 when it's charged.

[hitman:D]

Re: Lipo help, i know, again...

Just what i needed too know thanks guys

[Puddzzz]

Re: Lipo help, i know, again...

aye hook up the small connector, plug in the charger and the power light will come on and the green light should flash then go solid when charged.

Simples!

I like to ram a voltmeter into the gun/power connector so I can watch the voltage as it charges (handy way of seeing how long till it's done!) a 7.4 lipo will go to about 8.36 when it's charged.

http://www.dpcav.com/data_sheets/Tur...arger_2S3S.pdf - in the 3rd paragraph it says the charging in full

I have the same charger, I believe it's when the green light goes out. Correct me if im wrong, but its worked for me...

Rob

[gijohn2]

Re: Lipo help, i know, again...

http://www.dpcav.com/data_sheets/Tur...arger_2S3S.pdf - in the 3rd paragraph it says the charging in full

I have the same charger, I believe it's when the green light goes out. Correct me if im wrong, but its worked for me...

Rob

Bump on this , I just received mine and would much like to know the above

The first LED is soldi green and the second is red :S

the instructions dont make any sense either -.-