Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Odd Hop issue...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Odd Hop issue...

    Hi there,

    Having more problems with hop on my ICS M4, basically, I've tried everything and the pellet still flies left at around 20-25 metres... Any ideas?

    Tried twisting the barrel so hop is at angle.
    Tried 2 different nubs
    3 different rubbers
    cleaning the barrel...

    No more ideas tbh, the pellets are flying rather sharply to the left or upwards and left....

    Any ideas appreciated.

  • #2
    Re: Odd Hop issue...

    check the is no burr in the end of the barrel or something obstructing into the flash eliminator etc

    Comment


    • #3
      Re: Odd Hop issue...

      Should have read it all. Have you checked how the rubber is sitting on the barrel and in the hop up?

      Bent barrel or as above partially obstructed.
      Gun tech.

      AIRSOFTERS.........Load of Balls.!

      http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

      Comment


      • #4
        Take the nub itself out and test again.

        Comment


        • #5
          Re: Odd Hop issue...

          turd bbs could be the issue also....maybe wind lol
          sigpic

          Comment


          • #6
            Re: Odd Hop issue...

            if you have a silencer on there, take it off and retest

            Comment


            • #7
              Re: Odd Hop issue...

              Tried all of the aboves suggestions

              The only thing I can think is that the nub is obstructed somehow, though I can't see any obstruction....

              Comment


              • #8
                Re: Odd Hop issue...

                Take the barrel assembly out of the gun and looking through the barrel and hop rubber make sure everything is symetrical as you increase hop.
                Gun tech.

                AIRSOFTERS.........Load of Balls.!

                http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

                Comment


                • #9
                  Re: Odd Hop issue...

                  Ok, so I've done most things I can now but I've found that the hop nub becomes stuck as I alter the level of hop... Any ideas/solutions?

                  Comment


                  • #10
                    Re: Odd Hop issue...

                    edit, my bad

                    Comment


                    • #11
                      Re: Odd Hop issue...

                      Cut a slice off or use a different buffer.
                      Gun tech.

                      AIRSOFTERS.........Load of Balls.!

                      http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

                      Comment


                      • #12
                        Re: Odd Hop issue...

                        try a different hop up, or a different barrel if you have one to identify where the source of the problem is

                        Comment


                        • #13
                          Re: Odd Hop issue...

                          get a new hop up and hop up rubber and nub and then repeat the process. when u have the new hop up try just putting the nub through the hole in the hop up chamber and if it goes through fine then you are sorted
                          Main arm
                          M4 G+P.
                          MP5 with silencer

                          Side arms
                          Full Sig marked P226 GBB

                          Comment


                          • #14
                            Re: Odd Hop issue...

                            Guys if you are going to post advise please make it usefull....

                            Don't suggest he buy new barrel hop and rubber, after he has narrowed the problem down to buffer.
                            Gun tech.

                            AIRSOFTERS.........Load of Balls.!

                            http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

                            Comment

                            About the Author

                            Collapse

                            RastaBlasta Find out more about RastaBlasta
                            Working...
                            X