KSC Glock 19 Part #22 Problem

[Fabzster]

Re: KSC Glock 19 Part #22 Problem

the hammer hits the valve and dumps all gas in like a second or two

Its the normal Coleman propane that everyone uses here..
http://www.gicombatsupplies.co.za/pr...roducts_id/229

[Shinotama]

Re: KSC Glock 19 Part #22 Problem

Your rocket flow valve has snapped by the sounds of things, they are plastic in KSC etc, they go all the time, normally in 18C's first, in a game I was at 2 died in one match lol

Just simply look up a new rocket flow valve, it looks like a little arrow with a plunger on the end.

Unless someone thinks it's another problem...

[Fabzster]

Re: KSC Glock 19 Part #22 Problem

Hi thanks for the input

I removed the Floating valve from the nozzle and it seemed to be in good condition was not cracked or broken. any other ideas?

[tisane]

As jag says the last thing it can be now realistcaly is the hammer spring.
Myself i dont know a lot about them but im sure one of the above posts mentions how strong it needs to be.


Sent from my iPhone using Tapatalk

[Shinotama]

Re: KSC Glock 19 Part #22 Problem

Hi thanks for the input

I removed the Floating valve from the nozzle and it seemed to be in good condition was not cracked or broken. any other ideas?

Hmm thats surprising..

You probably have already but try another Mag?

[d_k]

Re: KSC Glock 19 Part #22 Problem

Hi thanks for the input

I removed the Floating valve from the nozzle and it seemed to be in good condition was not cracked or broken. any other ideas?

was it still all there :eek: might sound a silly Q but when mine broke it actually fired a small plastic dart of plastic.
just in case looks like all still there.
this was the only problem i ever found with ksc glocks was the valve snapps ....i had mine for 3+ yrs

you vid does look little like how mine went ....does it vent like 2-3 shots worth gas each shot

[Fabzster]

Re: KSC Glock 19 Part #22 Problem

yeah it was and fully intact, my one is a metal one, could this be because it is the Japanese ver. KSC G19?

Anway's it looks solid, My gun definately cycles harder now but still something is wrong, also it dumps gas now more than before. what the hell am I missing

gotta be a way to sort this out seems too weird..

[Fabzster]

Re: KSC Glock 19 Part #22 Problem

I purchased some new parts and GUESS WHAT!!!!!

Still the flipping same..... It does however not dump gas anymore

I replaced the followind

Part #22 (Air nozzle)
Enhanced Piston Cup
replacement nozzle springs
hammer spring
part #78 Shooters design enhanced Firing pin
Hurricane flow valve and spring

How the hell cant this be solved COME ON!!!!