WE TECH SCAR review

[Felixpredator]

Re: WE TECH SCAR review

At the risk of being horribly flamed i actually really dont like the eglm's, look a bit like a tuma on the thing to me. If and when i get this, i will instead be using an M203 Long which i think may just work with this (so long as i get a black one, no jokes!).

[Reppyboyo]

Re: WE TECH SCAR review

Got this email from WE:

The SCAR magazine part #133 is a tiny bit higher than the same part on the M4 mag. This allow for a better gas seal in the SCAR's internals. The M4 mag, of course, can still be used in the SCAR, but the gas seal may not be as tight. The raise the #133 is very easy, all one has to do is to fit a small O-ring under it (you can see this o-ring if you take loosen & take off part#132.

Kindest Regards,

WE Tactical Training International

So, either an o-ring fix on the mag or tape on the cylinder works.
Wonder why there isnt Scar specific mags on the market if this is the case?

[Felixpredator]

Re: WE TECH SCAR review

Can someone PM me where you can get hold of the CO2 mags, "the warrior of the land" says their out of stock so does anyone know where else i can get them?

[Reppyboyo]

Re: WE TECH SCAR review

Not a clue, everyone appears to be out of stock.

[perfectshadows]

Re: WE TECH SCAR review

Hey all just caught this forum on google, I am currently looking at buying a WE AWSS CO2 M4 currently I use an ICS M4 RIS but its time for some more realism! has anyone got one?

good review by the way :D

Glen

[Felixpredator]

Re: WE TECH SCAR review

Damn reserved one from Z1 but who knows when they'll be in. I really can't wait for this, litertaly I can't wait!

[perfectshadows]

Re: WE TECH SCAR review

damn they never have M4 CO2 mags in stock anywhere!!!!!

out of interest does anyone know what FPS the m4 co2 runs at? as we have a limit of 330fps for CQB at my skirmish site.

I have heard there a different CO2 nozzles for different FPS anyone know where you can get them???

Thanks for any help :D
Glen

[Reppyboyo]

Re: WE TECH SCAR review

About 440+ on CO2.

I cant find any mags in stock anywhere locally. (co2 that is)

[perfectshadows]

Re: WE TECH SCAR review

looks like I will need a RA-tech NPAs then lol

[Felixpredator]

Re: WE TECH SCAR review

Yeah so assuming i can find CO2 mags in THIS lifetime, can i get the FPS to a consistant 330 or under? Need to if i want this baby at urban. Has anyone asked if Z1 might be able to order some in, we might even get a discount.

[perfectshadows]

Re: WE TECH SCAR review

There is 3 ways of adjusting the FPS, I've done a lot of reading:

1. Ra-Tech NPAS adjusts valve opening by use of a hex key this inlcudes head as well so its a quick swap

2. TS Customs uni direction guide rod, similar method but doesn't come with head you have to use your own.

3. Make a space for the valve from a piece of old barrel about 2-3mms in depth

I'm going with the RA-Tech NPAS seems to be the one most people are saying is the better method to go with...

Just what i've read online, Knowledge is power as they say

[Felixpredator]

Re: WE TECH SCAR review

Thanks for that, any chance you could PM me where to get a Ra-Tech NPAS or is the response going to be "google is your friend...". Anyone know if you can fit a silencer on this thing, if so how?

[Jonny357]

Re: WE TECH SCAR review

yeah you can, its got a 14mm cww thread so any can screw on, also, any type of qd / over flashhider silencer that fits and m4 flashhider will work. just be careful it doesnt foul the front of the gas block.

the silencer actualy works with propane, but with co2 ive found it makes sod all difference

[Felixpredator]

Re: WE TECH SCAR review

Its more a thing of appearance. For me, the barrel is too short for the stock. But maybe im bigist...

[Jonny357]

Re: WE TECH SCAR review

i have seen a few reviews with barrel extensions, maybe a normal g and g one or something may fit, tho i cant say for sure