Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

airsoft systems Smart control unit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • airsoft systems Smart control unit

    Well I gone and done it now, I cut through the ribbon while replacing some parts. After an hour of soldering and taping nothing seems to work. I can not find out if they sell just the trigger units on their own. Anyone got any idea's or solutions I can try before I go and burn this. Nothing but trouble if you ask me, far to thin of a wire which causes for problems in the end. Also if anyone knows how to contact the company please let me know. I have searched and searched but no luck yet.

    Also what I would like to know is the motor beeps when plugging the battery in so that means there's power there but just no action. I might have to take it on the chin and throw it away and go back to the old system.
    jing gong g36k

  • #2
    Re: airsoft systems Smart control unit

    if it beeps its set up now just follow the programming guide that came with it
    After cheap project guns and various bits of kit

    Comment


    • #3
      Re: airsoft systems Smart control unit

      It beeps but It wont do anything else, also I do not have the manual anymore.
      jing gong g36k

      Comment


      • #4
        Re: airsoft systems Smart control unit

        surprisingly a systema data cable fits,although its a little bit shorter than the original,you can get them off ebay..heres the product number 120840885374
        VICTORIA CONCORDIA CRESCIT


        LOOKING FOR: S&W N-frame holster
        trader feedback http://forums.zeroin.co.uk/itrader.php?u=5191

        Comment


        • #5
          Re: airsoft systems Smart control unit

          No the ribbon I cut through was the actual switching mechanism. I have looked at it and soldered the best i could.
          jing gong g36k

          Comment


          • #6
            Re: airsoft systems Smart control unit

            Can you post a picture of where it's snapped?
            . .

            Comment


            • #7
              Re: airsoft systems Smart control unit

              Can you post a picture of where it's snapped? The beep will be it saying its got power but it's not getting signal from the sensors (switches etc)
              . .

              Comment


              • #8
                Re: airsoft systems Smart control unit

                everytime you plug the battery it beeps then switch to full auto quick pull the trigger then it will beep 1-2-3-4 select which fire mode you want from the manual
                After cheap project guns and various bits of kit

                Comment


                • #9
                  Re: airsoft systems Smart control unit

                  I blew up one of these not too long ago, so it happens that I have a spare switch lying round with nothing to do if you want it?

                  Comment


                  • #10
                    Re: airsoft systems Smart control unit

                    For spares, it sounds like "Madwelshman" on here has some, or can get some. Worth a try?

                    Comment


                    • #11
                      Re: airsoft systems Smart control unit

                      I will get a picture up later, when I plug it all up the motor is the thing that is making the sounds?
                      jing gong g36k

                      Comment


                      • #12
                        Re: airsoft systems Smart control unit





                        I think this might be the older version they did, i took off the heat shrink making sure all the rest of the board and system was okay
                        jing gong g36k

                        Comment


                        • #13
                          Re: airsoft systems Smart control unit

                          Indeed mate, the switch itself will be fine. Not sure if the older type is compatible with the new control wire so you're better off getting one off ebay.

                          Comment


                          • #14
                            Re: airsoft systems Smart control unit

                            Looked for the v1 switch but can not find one anywhere.
                            jing gong g36k

                            Comment

                            About the Author

                            Collapse

                            freakydan1 Find out more about freakydan1
                            Working...
                            X