piston help

[kraker]

Re: piston help

i already got the angle of engagement corrected with all the pistons i used. i got a marui one in the end but am having trouble getting the spring out i tried pulling it as hard as i can but its not shifting.

[dope_on_a_rope]

Re: piston help

Take the o-ring off, unscrew the piston head. It's a normal screw. You don't have to worry about the part inside the piston, as that's locked in place by a nub positioned in the hole on the piston head.

[kraker]

Re: piston help

well thanks guys, i got the old aruo one back in there and it going very well. did a 6 second mag dump the other day and about 3 ics bags through it and no problems