Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Battery Questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Battery Questions

    Hi this has probably been covered before but i could not find it any where. Basically what im looking to find out is what size of lipo would be suitable in my AA r85a1. It is currently running a 9.6v 1600ma with no issues. Thanks for any advice you can offer.

  • #2
    Re: Battery Questions

    Your right, it's been done a lot.

    7.4v 1400mah Lipo should be fine. Anything 7.4v lipo will be sufficient.

    /Thread

    Comment


    • #3
      Re: Battery Questions

      Thanks for your advice. Does the C rating on the battery have any influence in which one i should get?

      Comment


      • #4
        Re: Battery Questions

        The higher the C rating the better though there will be a point where it doesnt matter for airsoft purposes.

        The C rating is the discharge rating and can be explained with the following:

        Battery capacity (in Ah) * C Rating = Maximum continuous discharge

        So 1400mAh battery with a 20C rating

        1.4Ah * 20C = 28A continuous

        a 1400mAh with 25C rating

        1.4Ah * 25C = 35A continuous

        Most airsoft motors require no more than 40A but having the head room cant hurt.
        Upcoming Games:
        None

        Armoury: G&G GR15 Raider-L, KJW P226, Cybergun M3, TM MP5 (x2)
        Gear: British MTP, Warrior Assault Systems RICAS, Magnum Elite II Boots

        Comment

        About the Author

        Collapse

        kjaxxn Find out more about kjaxxn
        Working...
        X