Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

G&g mp5 problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • G&g mp5 problem

    https://m.youtube.com/watch?v=Ljw0h9JvyOM


    Any ideas?

    Changed motor adjusted hight still nothing

  • #2
    Re: G&g mp5 problem

    Stripped piston?

    Comment


    • #3
      Re: G&g mp5 problem

      Changed motor over for a working one I think it's internal so must be that then

      Comment


      • #4
        Re: G&g mp5 problem

        Yep id second stripped piston. Not too expensive to replace Anything unusual happen when it started becoming a problem? Sound funny or cycle bad?

        Comment


        • #5
          Re: G&g mp5 problem

          Sounds more like a gear problem from here.
          If you pull the trigger when in semi auto and the power cuts off, then that would point to piston issues, if not (same noise without cutout) for both fire modes than that points to the gear train.
          dsgdreamteam

          Comment


          • #6
            Re: G&g mp5 problem

            This is not a motor issue as you have stated that you switched the motors out only for the same thing to happen.

            Like Sniperjesus said if the motor only works in short bursts on semi then its likely the piston has stripped as the sector gear operates the semi auto lever inside the gearbox.

            However from the sound the AEG is making it sounds like the Bevel gear maybe at fault as i cannot hear the rest of gears spinning I could be wrong as the sound is being recorded on a phones mic.

            If you need help to disassemble the AEG see this video here on how to disassemble the G&G MP5 series:
            https://www.youtube.com/watch?v=WnOdI3B4_gc

            Comment

            About the Author

            Collapse

            harry66 TNW Find out more about harry66
            Working...
            X