Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

G&P M4 spring downgrade help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • G&P M4 spring downgrade help

    im going to be buying a G&P M4 sentry but my site limit is 350fps but LWA states the gun is at 360fps what spring would i need to down grade it and roughly what speed would it be at (at a guess)

  • #2
    Re: G&P M4 spring downgrade help

    put a couple thousand rounds through it and it should settle at around 340fps

    Comment


    • #3
      Re: G&P M4 spring downgrade help

      thanks. im guessing most guns do this.

      Comment


      • #4
        Re: G&P M4 spring downgrade help

        Depends on a few variations like the airseal and barrel bore.

        But generally speaking a M100 spring will give you around the figure you looking for. That being said, always worth checking. Put a Guarder M100 in my G36c, which pushed it to 353fps. Guarder springs tend to come a little hot, and I have a freakishly good airseal on my G36c (more by chance than skill!)

        Anyway, I've put a SP85 in there now. Cronoing tomorrow, but I'm expecting around 320 with some luck

        Comment


        • #5
          Re: G&P M4 spring downgrade help

          thanks for the tips. its just if everything goes to plan i should have it by wednesday but my next game is on sat.

          Comment


          • #6
            Re: G&P M4 spring downgrade help

            You got a back up weapon or your own crono?

            Otherwise you might have issues there if your site don't let you use it!

            Comment


            • #7
              Re: G&P M4 spring downgrade help

              no im selling my other guns to buy this. and can't afford a chrono atm. so its looking like im a tad screwed lol.

              Comment


              • #8
                Re: G&P M4 spring downgrade help

                I think you'd need to go to the site knowing you may need to either:

                - Hire a weapon
                - Borrow a mates
                - Go home

                What you could try is tapping the trigger quickly/lightly and catch the weapon mid cycle (So you hear the wirrr, but not the bang!). It might take a good few attempts.

                But once you catch it there, the spring is compressed. Leave it the couple days until your skirmish, and that might have done enough to lose some power from that spring.

                Comment


                • #9
                  Re: G&P M4 spring downgrade help

                  Failing that. You could always ask the shop to either down grade the spring for you or to clip the one thats in it. Either way they would have to open the gear box.

                  I usually find that M105 springs give arround 345 fps.
                  Gun tech.

                  AIRSOFTERS.........Load of Balls.!

                  http://forums.zeroin.co.uk/showthrea...r-Offizier-M41

                  Comment


                  • #10
                    Re: G&P M4 spring downgrade help

                    thanks alot guys i might just order a M105 spring and install it as soon as i get it.

                    Comment


                    • #11
                      Re: G&P M4 spring downgrade help

                      A M105?!

                      Good chance that will be over 350 slightly depending on air seal.

                      Best hope they not too strict!

                      Comment


                      • #12
                        Re: G&P M4 spring downgrade help

                        a new G&P will be hot to start off with but be warned even some makes of m100 will still be to hot ,
                        ca m15 with good airseal and hurricane m100 = 380fps
                        systema 1j in the same gun = 330 fps , g&p's have a super airseal so if you want to be safe use a 1j spring
                        Please do not advertise on this forum

                        Comment


                        • #13
                          Re: G&P M4 spring downgrade help

                          can someone recommend a 1j spring to me? the springs and names kinda confuse me

                          Comment


                          • #14
                            Re: G&P M4 spring downgrade help

                            You have a PM
                            WTB: TM HI-CAPA 5.1! CASH WAITING! PM ME!

                            Comment

                            About the Author

                            Collapse

                            virusoverload Find out more about virusoverload
                            Working...
                            X