30-40rps... doable?

[Riotharmus]

Re: 30-40rps... doable?

more to the point.... why would you want to.. that's a mid cap in 1.5 second, a high cap you couldn't even wind up in time.. and a low/real cap in the blink of an eye..

any poor bugger on the other end of it probably wouldn't be too happy either!

[gijohn2]

Re: 30-40rps... doable?

Box mag.
A airsofters best friend in a time of need :P

[tisane]

Explanation time.
Lee, at the precise second i pressed the quote button on my phone there was only one pic showing on my screen.
Although my reply was short i was doing other things at the time so there could have been other replys, i didnt know.
Im not usualy a t^*t, but your reply that contributed nothing to the thread either before or after, coupled with the fact that my entire home was at the time 1" deep in water pi**#d me off a little.
Why not contribute rather than complain?
Sorry guys


Sent from my iPhone using Tapatalk

[Ominous Slayer]

Re: 30-40rps... doable?

Because it pee's people off having to scroll down continouslly through pics that came up 1 post ago. Anyway this is not a thread regarding quoting pics so take it to pm or end.

[tisane]

I said my piece and apologised to the rest of the thread so im done.


Sent from my iPhone using Tapatalk

[richardy]

Re: 30-40rps... doable?

lipo FTW..

seriously! theres a reason we go on about them..

[HunterAndy]

Re: 30-40rps... doable?

If you're doing for the sake of doing, fine.

If you're doing to skimish, you might as well be happy with 20-30 rps and enjoy a little length of usage.

[EBR-freak]

Re: 30-40rps... doable?

ye i think ima stick with the setup now. simply because lipo is so expensive, the battery the charger. plus id end up spending more on cracked and sheered pistons

[tisane]

From experience i would say just try a cheap esky charger/balancer and a single 20c 7.4v.
I think all an all you can get the 2 for under £30
Then if you still dont like the idea drop me a pm i will at least have the battery off you.


Sent from my iPhone using Tapatalk

[EBR-freak]

Re: 30-40rps... doable?

haha, win win situation eh. its for CQB so high fire rate is allmost a must (in my opinion, obviously not others) its running on a box magazine as of tommorow anyway so running low on amma aint really problematic lets hope.

[tisane]

Honestly the offer is there if you do come over to the dark side.
But i honestly dont think you will take me up on it...lol
What weapon are you using just out of interest?



Sent from my iPhone using Tapatalk

[EBR-freak]

Re: 30-40rps... doable?

my lovely m4. the gearbox started life as a systema magnum gearbox

[centaur]

Re: 30-40rps... doable?

There has been a lot of discussions regarding Hi ROF, I have ventured to the extreme and have found out that the most playable low maintenace hi ROF set up is between 25-30 ROF, >30 be ready to spend a lot.......hehehehehehehe!

Set Up for 350FPS without too much modification
1. Minimum 7mm bearing GB
2. SP90 spring
3. piston head with bearing
4. shaved 2nd/3rd tooth of PB (swiss chess it if you want)
5. Spring guide with bearing
6. stock gears/hi speed gears.
7. hi speed motor (we prefer M120)
8. Power source of your choice (I normally use 9.6v 3300-3600 NiMh/ 11.1 lipoly 12C-15C.
9. 7.4V lipoly can easily give you 20ROF

You can easily attain this, measured using audio analysis!
27 spikes/sec. = 27bb's per second



Note: 7.4V lipoly can easily give you 20ROF
I wish this could help!

[centaur]

Re: 30-40rps... doable?

Double post! Kindly delete, thanks!

[sparrowhawk]

Re: 30-40rps... doable?

Note: 7.4V lipoly can easily give you 20ROF

yeah my standard VFC pdw with a 7.4v li-po does 20 rps