KA G36c mid cap problems

[padraigthesniper]

ok these are my first mid caps and they keep jamming and misfeeding what should i do would silicone oil help i just need them feeding all the rounds

[Grounded_Pilot]

Re: KA G36c mid cap problems

Give the mag a good clean. I play in Suffolk, and sand is a huge issue with mids for me! My old AUG mids kept jamming up because of tiny particles of grit and dirt.

It's not too difficult to disassemble a mag then reassemble after cleaning But a few squirt of silicon oil should do the trick.

[padraigthesniper]

Re: KA G36c mid cap problems

ok i will try cleaning them

[Grounded_Pilot]

Re: KA G36c mid cap problems

Also worth checking that:

Do the BBs jump freely out of the mag when you pull the release out? If they do it might not be an issue with the mags...
If it is really bunged up you can pull the release and nothing moves! haha!

[crasstoe]

Re: KA G36c mid cap problems

I had an issue with King Arms mid caps, turns out the nipple at the top wasnt the right shape for the feeding nozzle to move.

Try pressing up on the mag and firing, does it feed ok? If so here is your fix; http://forums.zeroin.co.uk/showthrea...s-for-ARES-G36

[Tiercel]

Re: KA G36c mid cap problems

Yep I had a similar issue with my G&P midcaps, heres how to fix them:

http://forums.zeroin.co.uk/showthrea...ap-feeding-mod