Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

IMAX B6 Charger Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • IMAX B6 Charger Help

    Hi,
    I just got my gun back from a shop where it was repaired and upgraded including the switch to lipo batteries. The one I was supplied is a 9.9V 1500mah LI-Fe.
    Now I have gone through and set up my IMAX charger for this, into settings an select 3.3v li-fe. Then into charge life, select 9.9v 3S with 1.5A. I start the charge and after a minuite or so it says full, with the cells Having reached around 3.6v.
    It won't go higher than that. I cannot see what I'm doing wrong, is the unit faulty or what!?
    Please help if you can.
    Thanks
    Last edited by qwerty123il; 6 April, 2012, 20:42.
    Wanted:
    Baton/Rubber 40mm grenades
    GHK AKM Magazines

  • #2
    Re: IMAX B6 Charger Help

    if it is a new battery mate, then the battery is full

    also when the battery is on charge is the balancing lead in the white block slot ??

    as the imax will bleep and say full when the battery is perfectly full

    but ..... the new imax units needs to be tweaked

    as the battery's need to be luke warm to the touch when fully charged

    go into the setting and the peak cut off for cell senstivity should be set to 12 or 13 not the standard 9 they come on.
    also the unit cut off time 120min
    etc etc

    then you will get full use of the IMAX also only charge at 1.2 a max on lipo or life battery's any more will rapidly reduce the cells life

    Comment


    • #3
      Re: IMAX B6 Charger Help

      Originally posted by r6shooter View Post
      if it is a new battery mate, then the battery is full

      also when the battery is on charge is the balancing lead in the white block slot ??

      as the imax will bleep and say full when the battery is perfectly full

      but ..... the new imax units needs to be tweaked

      as the battery's need to be luke warm to the touch when fully charged

      go into the setting and the peak cut off for cell senstivity should be set to 12 or 13 not the standard 9 they come on.
      also the unit cut off time 120min
      etc etc

      then you will get full use of the IMAX also only charge at 1.2 a max on lipo or life battery's any more will rapidly reduce the cells life
      Yes the balancing connector is connected.
      The battery never got hot, the charger did when I tried to discharge.
      I asked this on arnies as well, and they all said its also due to te LI-fe not being strong enough, and I should buy a lipo. That's what I'm going to try.
      Wanted:
      Baton/Rubber 40mm grenades
      GHK AKM Magazines

      Comment

      About the Author

      Collapse

      qwerty123il Find out more about qwerty123il
      Working...
      X