barrel advise l96

[zenshot]

My l96 has a brass barrel set up, just bought a stainless barrel as part of some upgrades, I bought off here.

would the barrel be a tight bore, or is the tight bore a brass one ??

how do you release the barrel and hop unit?

put in a better cylinder a alloy one, but cant get the upgraded spring to fit the alloy guide too small diameter . Got it running at a consistant 470 ish fps , is that enough, dont want to go too high and risk running over fps limits.

I like the style of the L96, and want to keep it going, I know theres much better guns around.

[guard-sniper87]

Re: barrel advise l96

wel first off mate , the Tb barrel series doesn't fit straight into the standard hop unit , unless you have a 5-7mm spacer to put in infront of the barrel ,

the stainless will be a tb barrel , but the standard brass , are 6.04 standard

and there is a few guides on youtube for the dissasembly steps , but if unsure mate , give me 20 mins and will write one up for you .

Guard

[zenshot]

Re: barrel advise l96

the stainless barrel has a hop unit on the end looks standard, but may be a upgrade as well

if you could write me a guide up it would be an help for the future

thanks for your help

[guard-sniper87]

Re: barrel advise l96

pm'd with guide

[zenshot]

Re: barrel advise l96

Thanks for the link.