Upgrading a Snow Wolf Barrett M99

[Kodiak]

Hi guys. I need to replace the hop up unit and rubber in my M99 to a TM one. Anyone got any advice please? What do I need exactly, as it's Maruzen L96 internals I believe.

[private parts]

Re: Upgrading a Snow Wolf Barrett M99

Its aps2 parts

[guard-sniper87]

Re: Upgrading a Snow Wolf Barrett M99

if it is aps parts mate ,

what hop unit is inside , also if the hop units changable , try the aero or pdi unit in side , then can use AEG barrels and hop rubber,

[private parts]

Re: Upgrading a Snow Wolf Barrett M99

To keep all upgrade chat in 1 thread, id just like to let you know ive fitted aps2 teflon cylinder in my m99 and im going to mod a zero trigger to fit.
Will add pictures and write up when i do it.

[armourerdoug]

Re: Upgrading a Snow Wolf Barrett M99

Hi guys. I need to replace the hop up unit and rubber in my M99 to a TM one. Anyone got any advice please? What do I need exactly, as it's Maruzen L96 internals I believe.

did you replace the hop?

[armourerdoug]

Re: Upgrading a Snow Wolf Barrett M99

To keep all upgrade chat in 1 thread, id just like to let you know ive fitted aps2 teflon cylinder in my m99 and im going to mod a zero trigger to fit.
Will add pictures and write up when i do it.

I bought Kodiaks M99 so am very interested in how your mods have gone, i am getting only 406 fpr out of it , have totaly stripped and re built it carefully, may heve to order a higher rated spring ,so the cylinder mod would be good to try too

[private parts]

Re: Upgrading a Snow Wolf Barrett M99

i had 502fps out of mine, Alloy piston,spring guide,teflon cylinder and a trimmed 150sp spring.
The zero trigger was a mare to mod to fit but worked.
Ive now stripped the goodies out of it and put then#m in a different gun

[armourerdoug]

Re: Upgrading a Snow Wolf Barrett M99

Ok thanks for that info, I have already ordered parts for mine now so will see how it performs 

[VOLK]

Re: Upgrading a Snow Wolf Barrett M99

i had 502fps out of mine, Alloy piston,spring guide,teflon cylinder and a trimmed 150sp spring.
The zero trigger was a mare to mod to fit but worked.
Ive now stripped the goodies out of it and put then#m in a different gun

Hi, what teflon cylinder did you use? How did you mod a zero trigger (some pictures would great if you have them)? Do you have any parts (m99) up for grabs?

[armourerdoug]

Re: Upgrading a Snow Wolf Barrett M99

Have just got back from filming in Spain for 3 months, will have a play with my Barrett and see how it performs

[private parts]

Re: Upgrading a Snow Wolf Barrett M99

The zero trigger needed a small slot cut out of the body of the gun so the trigger could poke down through, i then made a linkage out of a bicycle spoke to push the trigger.
Not ideal, but couldnt source a replacement trigger and had the zero 1 lying around.
The teflon cylinder i have is from an L96 i think