Tightbore Barrel

[private parts]

Re: Tightbore Barrel

Or get a hop unit that takes aeg barrels

[abelattack]

Re: Tightbore Barrel

Ok for a Well Warrior you need a maruzen tightbore APS96

Where could I get this from?

[JOE90]

Re: Tightbore Barrel

Google! or if not try the forums most reccomended site! ZEROONE!

[aribos]

Re: Tightbore Barrel

We can only mention zero one on this forum (seeing as its part of their site) google if they dont have them. Look for laylax APS96 (i'm pretty sure its 96 but if you look on the upgrades thread done by guard-sniper87 should tell you in there)

[guard-sniper87]

Re: Tightbore Barrel

right ok , to clear a fare few mis guided info up on this thread ,

the inner barrel length for the type 96 rifle both warrior and maruzen is 490mm

also there is a hexegan product hop unit which allows you to use aeg barrels ,
also the pdi unit for the type 96,

there is a big thread on the main menu about upgrading L96 rifles

also there are many tightbore barrels , after installing an upgraded aftermarket hop unit, any aeg barrel the size in mm or 500mm( will leave a small bit outside the rifle also will need the barrel end cap bore hole making bigger )

[abelattack]

Re: Tightbore Barrel

also there is a hexegan product hop unit which allows you to use aeg barrels

Just did a search for this, and couldn't find anywhere that sell it in the UK?

[guard-sniper87]

Re: Tightbore Barrel

no as they are from the us mate , most sites stopped stocking them due to the demand for the PDI unit ,

go for either mate,

but be warned , if you do not set the pdi unit up very carefully and correct, say goodbye to the rifles performance and the hop rubber will also be subject to tearing

[abelattack]

Re: Tightbore Barrel

no as they are from the us mate , most sites stopped stocking them due to the demand for the PDI unit ,

go for either mate,

but be warned , if you do not set the pdi unit up very carefully and correct, say goodbye to the rifles performance and the hop rubber will also be subject to tearing

PDI is wayyy to expensive :P
Hexagon looks more appealing but wouldn't have a clue where to get one from

[guard-sniper87]

Re: Tightbore Barrel

just keep looking at google mate

any probs feel free to ask .

[abelattack]

Re: Tightbore Barrel

Thanks