Mp9's and mp7's

[imperfect_design]

Re: Mp9's and mp7's

here is my new toy and the rig i use when i run with it

standard internally bar the cqb bolt, externally aimpoint t-1, rvg and a nextorch tr1 toch

[Scottiee]

Re: Mp9's and mp7's

Not the best photos I've ever taken but here are my KWA MP7 and MP9

[tisane]

Re: Mp9's and mp7's



My VFC as it currently stands.

While I'm here I need a little help with from those who have KWA MP7s with the VFC silencer attached.
I've seen somewhere that the VFC silencer will fit the VFC MP7, all I need is the outer diameter measurements for the flashider, and also the rough inner diameter of the silencer adaptor that is included with the silencer so I can see if those dimensions are the same as that of my stock VFC MP7 flashider.

Cheers
Lee

[mumbles]

Re: Mp9's and mp7's

Thought I would ask here first.
Anyone any good with internals of The mp9. Got an issue with mine and I don't want you dive in and make it worse.
Will post up description and pics tomorrow but basically the firing mechanism is getting stuck. A little prod with a screwdriver and it works but resets and sticks.
It's been used a handful of times and only had a little tlc not a full strip and clean so that's my first point of call.
Anyway will get info up tomorrow but if your any good with the internal workings of them I would appreciate any help as I'm looking to sell it.
Mumbles.

[Pepperisit]

Re: Mp9's and mp7's

Thought I would ask here first.
Anyone any good with internals of The mp9. Got an issue with mine and I don't want you dive in and make it worse.
Mumbles.

Sounds really basic, but are all the correct parts lubricated?
I cracked the loading nozzle in mine and it cause the bolt to lock back and vent gas, and occasionally it would cycle 90% fine but get stuck before returning to battery.
I know they often have problems with the disconnecter or but I do not know what symptoms that would show up.

Hope I could help! (But that's all the experience I have with them)

[dj2l8b]

Re: Mp9's and mp7's




"Assumption is mother of all fuck ups!"

[mumbles]

Re: Mp9's and mp7's

Pics of problemIMG_00000067.jpgIMG_00000069.jpgIMG_00000068.jpg
Basically the part marked with the tip of the screwdriver is about 2mill too far back and the firing mechanism winter release

[tisane]

Re: Mp9's and mp7's

Finished article

[Wilkes 1875]

Re: Mp9's and mp7's

Summer Toy! :D

P1060351.jpgP1060352.jpg

[dave38x]

Re: Mp9's and mp7's

My new favourite gun :D

Got to do the lower in the camo too, as well as the torch/mount and suppressor (when I get around to buying it). Going to re-do the RMR as the bit I used for that is particularly bland!

[Boo-Sabum Ben]

Re: Mp9's and mp7's

Revival!

[Ricey1967]

Re: Mp9's and mp7's

My MP7 with mini PEQ

IMG_6657.jpgIMG_6658.jpgIMG_6659.jpgIMG_6663.jpgIMG_6664.jpgIMG_6665.jpgIMG_6666.jpg