Pictures of your Systema PTW

[The Reptile House]

Re: Pictures of your Systema PTW

Cheers Will

It didn't take too long to get the rail on. I torqued it at 30 ft lbs and it timed almost perfectly with the hole for the gas tube. Just needed a little nudge. Putting the A2 sight on was another matter. Took about two hours and I bent one of the pins, so I'll have to get a replacement

[Jsmithy]

Re: Pictures of your Systema PTW

Haha unlucky At least you did it correctly and not just take a hammer and a chisel to it like some people do

[Creedy]

Re: Pictures of your Systema PTW

heres mine in its current set up - fancy a new sight tho

[dannyeprice23]

Re: Pictures of your Systema PTW

Dual upper: short
Systema 2012 Max CQB-R (sck)
- PGC lower receiver (teflon coated)
- RS Colt upper receiver (teflon coated)
- VFC 7" URX (custom made barrel nut and CNC modified on the front pin area)
- Vltor EMOD stock (shortened the power board and lipo 11.1/1200/20C inside the buffer tube)
- James Well front grip
- Dytac aluminium outer barrel (12" but was shortened and re-threaded to be identical with the CQBR one)
- Troy foldable battle sights (VFC)
- Index LaRue clips
- Daniel Defence QD mount
- KAC trigger guard (modified to fit)
- Brugger & Thomet silencer (ROTEX III)
- Insight M6X laser/flashlight

That's the most beautiful thing I have ever seen! Sell me that this second!! I need both this, and mikes defender!!

[dxnib1]

Re: Pictures of your Systema PTW

Diemaco L119A1 build. Fully Modded.

Custom outer Barrel,
Army Code L119A1 front sight.
Real steel L119A1 two-part RIS
Real steel Knights Armament RIS for-grip.
Real steel Diemaco DIS/Carry handle.
G&P Storm grip.
Real Steel Magpul ASAP sling.
Guarder Stock.



Magpul/Noveske Build. Fully Modded.

M4A1 barrel.
Madbull Noveske adjustable gas-block
Madbull Noveske 10" open RIS
Magpul PTS RVG
Vltor Upper receiver
Magpul Lower receiver
Real Steel Magpul ASAP sling.
Real Steel Command-Arms stock
Real Steel Noveske flip-up BUIS
G&P aimpoint T1



Both with a spare M733 Length upper.

[Delta]

Re: Pictures of your Systema PTW

Gorgeous mate!! Really really impressive!

[Blackvain]

Re: Pictures of your Systema PTW

IMG_0115.jpg

[Opossum]

Re: Pictures of your Systema PTW



2012 Challenge Kit with A2 upper and RS handguard

To do list:
-Get rid of the Magpul trigger guard (That doesn't fit)
-Get rid of the nasty lump on the grip.

[GhostDivisionAirsoft]

Re: Pictures of your Systema PTW

You build it yourself? If so epic work! If not still epic because it doesn't have all the bells and whisels attached, but less so .

[Fenriz]

Re: Pictures of your Systema PTW

2012 Challenge Kit with A2 upper and RS handguard

To do list:
-Get rid of the Magpul trigger guard (That doesn't fit)
-Get rid of the nasty lump on the grip.

Stock tube lipo mod and a nice M733 stock?

Looking very nice!

[Opossum]

Re: Pictures of your Systema PTW

I built it up myself, using hammers and swearing.

It will have a lipo stock tube eventually, but all my guns have 733 stocks so I'm enjoying the novelty of a crane stock for the time being. I'm gonna pick up some Vanaras plastic mags tomorrow... I was hoping to get those cool Tangodown ones but apparently they're not so good.

[TOBI]

Re: Pictures of your Systema PTW

I built it up myself, using hammers and swearing.

It will have a lipo stock tube eventually, but all my guns have 733 stocks so I'm enjoying the novelty of a crane stock for the time being. I'm gonna pick up some Vanaras plastic mags tomorrow... I was hoping to get those cool Tangodown ones but apparently they're not so good.

Not so good is an understatement!

[Fenriz]

Re: Pictures of your Systema PTW

Good plan! Im currently looking for a complete M4 upper as far as PTW purchases go. Wouldnt believe how hard it is just to find a standard length M4 upper.

[mugur]

Re: Pictures of your Systema PTW

That's the most beautiful thing I have ever seen! Sell me that this second!! I need both this, and mikes defender!!

Thank you
This is final (the short one):

[dannyeprice23]

Very nice job indeed. Is Teflon coating an expensive process?